AMSOIL High Tack Foam Filter Oil
AMSOIL Foam Filter Oil has long provided users of AMSOIL air filters with a high level of air flow and superior particle removal. Now, five years of research, testing and development have yielded a new and improved Foam Filter Oil formulation. New AMSOIL High Tack Foam Filter Oil is a special blend of synthetic polymers that allows maximum air flow and increased particle removing efficiency and capacity. High Tack Foam Filter Oil stays in place throughout service life, resists washout from carburetor fogging and will not plug foam filter cells, while its new red color helps ensure even oil coverage across the entire filter.
AMSOIL High Tack Foam Filter Oil was tested with AMSOIL 2-Stage Foam Filter media under the SAE J726 test methodology, yielding an efficiency rating of 99.5 percent. High particle removing efficiency is critical in preventing engine wear, keeping equipment running at peak efficiency and improving fuel efficiency.
AMSOIL High Tack Foam Filter Oil is available in its traditional form and a new and convenient aerosol spray. Because it offers users quick and convenient application, the new spray formulation is a boon for power sports enthusiasts.
Package sizes include:
8-oz. Bottles (case of 6)
11-oz. Spray Can
11-oz. Spray Cans (case of 6)
Applying High Tack Foam Filter Oil
For best performance, apply a generous amount of High Tack Foam Filter Oil and work it into the foam media. Squeeze out excess oil, leaving a uniformly oiled filter.
A properly oiled filter will feel oily or tacky to the touch on both the outer and inner surfaces, but should not be dripping oil.
When reinstalling the air filter, apply a thin film of AMSOIL Multi-Purpose Grease on the foam base to insure a leak free seal between the filter and housing.